Description
How to upgrading the Firmware (BIOS)
BIOS is the Firmware that handles all hardware in the caliper.
The BIOS needs to be upgraded on occasion as follows:
- Unzip the Downloaded file.
- Reset the DP II+ by giving a short press on all five (5) buttons at the same time on the terminal. The DP II+ resets.
- Navigate to the ”USB” menu with right arrow button.
- Press Enter.
- Connect the USB adapter to the DP II+ and the USB cable to the USB adapter and PC.
- The PC operating system will initiate connection to the DP II+. The DP II+ now works as a USB memory stick (MSD device)
- Start the PC file explorer and copy the new Bios file (ex. ”DPII V2.58.DPB+”) to the root directory.
- Also copy this files if they are missing in the root directory: ”autorun.inf”, and ”DPII+.ico”.
- Disconnect the PC with Escape in the DP II+.
- Remove the USB adapter by releasing the stop and pulling the USB adapter backwards.
- Reset the DP II+ with a short press on all five (5) buttons at the same time. The DP II+ restarts and updates the Bios.
History
- V259 2024-05-31 Calibration check (should have v1.3 in smartscale), light delayed from 10min to 60min, Russ flagg empty.
- V258 2024-02-26 GpsPos fix long can be 0 if 8 chars in hgt data
- V257 2024-01-15 Radio reset registers
- V256 2023-11-06 Slovakia flag, Radio butt fix, CHG- + keyscan fix, AD test fix, prg date fix
- V255 2023-08-30 Support for BMA255 sensor
- V254 2023-05-23 Vendor changed to Haglof (Dasa had problem with Linux forester)
- V253 2023-05-23 Enable500mA vid uppstart ifall det var tomt batteri
- V252 2023-05-10
- Fix cls() disp reversed didnt clear 4 last pix.
- Volume control high/low
- cpu uses x32ulp instead of x32osc in case of osc error
